Sartorius CH3G Instructions d'exploitation télécharger pdf (Page 15)

15

Bar graph:

The bar graph shows the percentage of the

weighing platform’s capacity that is “used

up” by the load on the scale (gross value).

When the Checkweighing application is

active, the tolerance limits are also shown

(calculated value). The following symbols

may be displayed here:

0% Lower limit

100% Upper limit

Bar graph with 10% markings

Minimum for the

Checkweighing application

Target for the Checkweighing

application

Maximum for the

Checkweighing application

Plus/minus sign:

This field shows either a plus or minus sign

(

+ or -) for weight values (or calculated

values), or the

o symbol when the

weighing platform is zeroed or tared.

Measured value/result line:

This field shows weight values, calculated

values and input characters.

Unit and stability:

When the weighing system reaches

stability, the weight unit or calculation

unit is displayed here.

Tare in memory, calculated values:

A symbol here indicates that a tare value

is stored or that the result is a calculated

value.

The following symbols may be displayed

here:

a Calculated value (cannot be

used in legal metrology)

NET Net value (gross weight

minus tare)

B/G Gross value (net value

plus tare)

Text lines:

The text lines show operator support

information, such as the name of the

active program, user guidance prompts,

etc.

Soft key labels:

This line shows the abbreviations or

symbols that indicate soft key functions

Display Mode for Configuration

and Information (Setup)

This display is divided into three sections.

Line for operating status:

The operating status line indicates

the function of the current screen page.

In the Setup program, this line shows

the “path” to the information displayed

Input and output window:

This section shows detailed information

(e.g., on the selected application) or a list

of options for selection. A selected item is

displayed inversely (white letters on a black

background). You can enter letters and

numbers in active fields here.

Soft key labels:

See the description above, under “Function

Keys (Soft Keys)” (page 13).

Status line

Input/output window

Soft key labels

Example: Setup: Device parameters:

WP-1: Internal: Adapt filter:

o This symbol indicates the currently

active menu setting

Setting parameters:

§ Press the Q or q soft key repeatedly

until the desired parameter is selected

(inverse display)

§ Confirm the setting: Press the l soft

key

§ Exit the Setup program: Press the

M key

Error Codes

– If a key is inactive, this is indicated as

follows:

– The error code “-” and/or

“

No function” is displayed for

2 seconds. The display then returns

to the previous screen content.

– An acoustic signal (double-beep)

is emitted.

– Temporary errors are indicated by

an error code, shown in the measured

value/result line for 2 seconds (for

example,

Inf 09).

– Fatal errors are indicated by an error

code displayed steadily in the measured

value/result line (for example,

Err

101

), until you turn the Combics off

and then on again (reset).

This process is the same for all

operating modes (weighing, application

programs and Setup program).

Error codes and messages are described

in detail in the chapter entitled “Error

Codes.”

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 93 94

Commentaires sur ces manuels

Pas de commentaire